Isocyanate MR200 Tosoh Japan

   MILLIONATE® MR-200

   PRODUCT INFORMATION

   1. Discription

  • Polymeric MDI

  • MILLIONATE® MR-200 consists of pure-MDI and polymerized-MDI.

   2.   Application

  • Used in applications such as rigid, semi-rigid, and integral skin

  • Used primarily in spray foam applications and exhibit superior compatibility with

  • Used for manufacture of polyurethane binders,coatings, adhesives and elastomers

   3.   Product Specifications

 

Unit

Content

Appearance

-

brownish liquid

NCO Content

%

30.5 - 32.0

Acidity (as HCl)

%

max. 0.04

Viscosity

mPa・s at 25℃

150 – 250

   4.Typical Properties

 

Unit

Content

Appearance

-

brownish liquid

NCO Content

%

30.9

Density

g/cm3 at 25℃

1.24

Viscosity

mPa・s at 25℃

200

Functionality

-

2.7

Flash Point(C.O.C)

226

*These values provide general information and are not part of the product specification.

   5.Safety Precautions

  • Handling of the product refer to Safety Data Sheet (SDS).

   6.   Handling Precautions

  • Use reasonable care and store away from oxidizing

  • Keep container tightly closed in dry, cool, well-ventilated place. CO2 gas generated from the reaction between isocyanate and water may cause a burst of a

  • I n case of contact with eyes rinse thoroughly with plenty of If symptoms persist, seek medical advice.

  • In case of contact with skin wash off immediately with soap and

  • Use in the correct manner and appropriate

  • Use adequate personal protective equipment (respiratory apparatus, goggles, gloves, etc) while

< Trở lại